BEBIKR 2nd Gen PPSU Straw Bottle

The Straw Bottle Thousands of Moms Love – Upgraded for a Happier Feeding Journey

Introducing the BEBIKR 2nd Generation PPSU Straw Bottle – a smart, safe, and baby‑friendly drinking cup designed for little ones who are ready to transition from nipple to straw. Whether you’re teaching your baby to drink independently or looking for a leak‑proof, blowout‑free bottle for warm milk, BEBIKR delivers peace of mind and effortless sipping.

Why BEBIKR? 6 Upgraded Experiences That Make a Difference

Key Features That Make Daily Feeding Easier

🥤 Innovative X‑Cut & Cross‑Cut Valve
The specially designed spout opens only when baby sucks – no need to bite or press hard. Milk flows gently, not in sudden gushes, so there’s no choking. Unlike open‑hole spouts, this design also prevents formula from spraying when you add hot water.

🌡️ 70°C Anti‑Blowout Technology
Add warm water (below 70°C / 158°F) directly into the bottle – it won’t spray or squirt out. The one‑way vent seals when heated, so you can mix formula safely without milk shooting everywhere.

🔒 Flip‑Up / Lock Lid – Inverted, No Leaks
The lid closes tightly with a secure seal. Turn the bottle upside down, shake it, toss it in a diaper bag – no drips, no mess.

🌀 Dual‑Vent Anti‑Colic System
Two air intake valves allow air to flow in as baby drinks, balancing pressure and preventing the nipple from collapsing. This means less swallowed air, less gas, and fewer burps.

⚖️ 360° Gravity Ball Straw
A weighted ball follows the liquid no matter how the bottle is tilted. Baby can drink while sitting, lying down, or playing – in any position. The straw reaches every last drop.

🖐️ Ergonomic 45° Handle
The wide, angled handles are easy for small hands to grip. Baby can hold the bottle confidently, building motor skills and drinking independence.

🎨 Adorable, Baby‑Favored Designs
Cute, colorful patterns (like Rose Pink) make the bottle exciting for little ones. Moms report that babies actually want to drink from it.

🧼 Fully Removable – Multiple Sterilization Methods
Every part can be taken apart for thorough cleaning. You can sterilize using:

• Boiling water (follow time limits: ≤2‑5 minutes for different parts)

• Steam sterilizer

• UV sterilizer

Tip: For boiling, avoid letting parts touch the pot wall – keep them submerged in rolling water for ≤1 minute (silicone parts) and ≤2 minutes (PP parts).

Three Feeding Stages – One Bottle Grows with Baby

BEBIKR is designed as a 3‑in‑1 system (nipples sold separately or included in some bundles):

*The main product shown is the straw bottle version, recommended for 6+ months (or 12+ months for the straw spout).*

What Moms Are Saying

“The spout is so soft – just like a breast. The gravity ball is super convenient, and most importantly, it really doesn’t spray or leak!”

“My 14‑month‑old daughter uses the PPSU straw cup. One gentle sip and she drinks milk easily. Warm water under 70°C – truly no blowout! Safe and convenient.”

Product Specifications

What’s in the Box

• 1 x BEBIKR PPSU bottle body (your choice of 240ml or 300ml)

• 1 x Straw spout (silicone)

• 1 x Straw assembly with gravity ball

• 1 x Dust cover

• 1 x Locking ring

• 1 x PP handle (built‑in / detachable)

Care & Safety Instructions

✔ Before first use: Disassemble all parts and sterilize by boiling for 2–5 minutes (check chart below).
✔ Daily cleaning: Use a soft bottle brush and mild detergent. Rinse thoroughly.
✔ Sterilization guidelines:

✔ Avoid: Over‑boiling PP parts (they may warp). Do not use microwave sterilization unless specified.
✔ Inspect regularly: Replace spout if it shows cracks, stickiness, or discoloration.
✔ Temperature warning: Always test liquid temperature before giving to baby. The anti‑blowout feature works for water below 70°C – never add boiling water directly.